About Primary Injection Kit
The Skipper Primary Injection Kit can be used to test Current Transformers, Relays, MCBs, etc.
This test kit performs one of the most important tests. The Injection of a known predetermined current from the kit helps check if the MCB/circuit under load will trip.
Depending on the model, the kit is supplied with multiple accessories of which details can be viewed below. The Skipper Primary Injection Models are compact, usuable in rugged environments and have long duty cycles.
- ⚫ Compact size
- ⚫ Easy to transport
- ⚫ Rugged design
- ⚫ Longer duty cycles
|MODEL ||PIK200 ||PIK500 ||PIK800 ||PIK1000 ||PIK1500 ||PIK2000 ||PIK2500 ||PIK3000 |
|Output Current ||0-200A ||0-500A ||0-800A ||0-1000A ||0-1500A ||0-2000A ||0-2500A ||0-3000A |
|Burden ||1KVA ||3KVA ||5KVA ||5KVA ||10KVA ||15KVA ||15KVA ||20KVA |
|Open Circuit Voltage ||5V ||6V ||6.2V ||5V ||6.6V ||7.5V ||6V ||6.66V |
|Operation ||Manual ||Manual ||Manual/ ||Manual/ ||Manual/ ||Manual/ ||Manual/ ||Manual/ |
|motorized ||motorized ||motorized ||motorized ||motorized ||motorized |
|Units ||Combine Control &loading unit ||Combine Control &loading unit ||Combine Control &loading unit ||Combine Control &loading unit ||Combine Control &loading unit ||Separate Control &loading unit ||Separate Control &loading unit ||Separate Control &loading unit |
|Main supply ||230V AC 50Hz +/-10% |
|Duty cycle ||10 Min. ON & 20Min.OFF |
|Accuracy ||+/-1.5% +/- 2 digits |
|Display ||LED / LCD |
|Protection & Safety ||MCB/HRC Fuse/Zero start interlock |
|Timer ||0.0001Sec. to 9999Sec. |
|Timer Accuracy ||+/-0.05% +/- 1 Count |
|Voltage Resolution ||1V |
|Current Resolution ||1A |
⚫ Test Lead Set cotton braided copper cable or PVC Cable with lug at both end.
⚫ Mains cord.
⚫ Spare fuse
⚫ Instruction Manual
⚫ Warranty certificate